Dulcometer type PHWS 014 F2K2 for pH control

ProMinent pH Controller type PHWS 014 F2K2 is suitable for Panel /Wall mounting enclosed in a plastic housing of size 144x1.75x125 mm. The housing is made of Noryl Plastic and the class of protection is I P 54.The Controller is suitable for a supply of 230 Volts, single phase, 50 c/s.

The measuring and control rarige is 0-14 pH. The controllers emit two pulse train signals to control two ProMinent Electronic Dosing Pumps and two relay outputs. The pulse signals are proportional to the deviation in the measured value from the set value and in turn the dosing rate will also be proportional to this. This will result in uniform levels of pH being maintained.

As an option an additional output signal of 0/4 - 20 mA can also be provided for graphic recording.

Dulcometer type RHWS F1 K2 for control of ORP

The features are the same as mentioned earlier. The measurement and control range of ORP is 0-1000 mV.

ProMinent Controllers are supplied along with probes, probe housing and necessary cables.

Dulcometer type CLWS F2K2 for Control of Chlorine

The dimensions and other details are similar to the pH Controller type PHWSF2K2 as explained.

The measurement range of Chlorine is 0-5 mg/litre and the control range is 0-2 mg/litre.

Complete systems including ProMinent Electronic Dosing pumps are available. These systems ensure uniform levels of the above parameters being maintained at all times.