Suggestions
Products
See all results for products

Electrolysis System CHLORINSITU IIa 60 – 2,500 g/h

Output 60 – 2,500 g/h of chlorine

CHLORINSITU IIa is a compact on-site electrolysis system for the production of a low-chlorate hypochlorite solution from salt and electricity. Key advantages are its simple process management and excellent system safety through integrated ventilation and bleeding.

Product description

Enhanced efficiency through innovative design.

The CHLORINSITU IIa product range combines the proven and robust construction of the undivided electrolytic cell with innovative design. An excellent quality of the hypochlorite solution is achieved while increasing the salt and electricity yield. The chlorate content of the product is below the limit value specified in EN 901.

With a capacity of up to 2,500 g chlorine per hour, the electrolysis Chlorine and sodium hydroxide are produced in-situ in electrolysis by passing an electric ... more in the glossary system is perfectly equipped for safe water disinfection.

All relevant system components are located in a space-saving housing. The integrated hydrogen removal system allows installation without additional ventilation requirements.

For systems up to 300 g/h, the softener and a 50 l product container are installed in the system housing. An integrated metering pump transports the chlorine from the tank directly to the application or to a larger storage tank.

An H2 degasser triggers the hydrogen directly from the hypochlorite in systems from 625 g/h. The hydrogen-free product is transported to an external product tank via an integrated pump. The product pump also conveys the product over height differences of up to 7 m. Customer-specific metering stations supply the points of injection.

The external product tank does not require any additional hydrogen deaeration. This means there are no additional costs for installation and operation.

Thanks to the plug & play concept, the system is ready for immediate use. The operation of the electrolysis Chlorine and sodium hydroxide are produced in-situ in electrolysis by passing an electric ... more in the glossary system is deliberately kept simple.

Your benefits

  • Durable design, reliable technology
  • Low-chlorate product (below the EN 901 limit value)
  • High output: only 3.0 kg of salt per kg of chlorine
  • Reduced energy consumption: only 4 kWh/kg chlorine
  • Minimal maintenance work and ease of operation
  • System monitoring in real time from any location via DULCONNEX Platform: improved process reliability, overall reliability and transparency through real-time monitoring, individual alarms and automated reports (optional with the Siemens control variant)

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    Electrolysis System CHLORINSITU IIa: Safe disinfection at the touch of a button.

Field of application

The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.

  • Potable water
  • Swimming pool water
  • Process water

    Swimming pool water treatment in hotels and resorts

    An attractive pool with crystal-clear water is absolutely essential

    You are an expert in pampering your guests, young and old, with everything they could desire. This usually includes an attractive swimming pool or even a luxurious spa area. This is where one of our core skills come in.
    more

    Swimming pool water treatment

    Modern disinfection processes enhance the bathing experience

    Modern disinfection processes coupled with state-of-the-art measuring and control technology from ProMinent enhance the bathing experience. Our UV and ozone systems make swimming pool water hygienically pure. In addition to conventional disinfection with chlorine, unpleasant smells can also be avoided, for example.
    more

    Disinfection using chlorine and electrolysis in public swimming pools

    Attractive alternative to traditional chlorine disinfection

    Various procedures are used to disinfect swimming pool water. Unlike the conventional metering of sodium hypochlorite, using cost-effective and environmentally-friendly electrolysis systems brings numerous benefits for operators.
    more

    Technical Details

    • Efficient undivided electrolysis cell
    • Corrosion-proof housing with integrated ventilation fan
    • Control with multicoloured touch panel
    • Optional remote maintenance module
    • Salt-dissolving tank included in the scope of delivery
    • Integrated 50-litre product storage tank with optional diaphragm metering pump (up to 300 g/h)
    • Integrated softener (up to 300 g/h)

    Technical Data

    Power supply 
    (60 – 300 g/h):230 V AC ±10 %, 50/60 Hz
    (625 – 2,500 g/h):3 x 230/400 V AC ±10 %, 50/60 Hz

    Output

    Number of electrolysis cells

    Product volume (NaOCl)

    Power uptake

    Max. salt consumption

    Dimensions H x W x D

    Brine tank

    g/h

    kg/d

    l/h

    kW

    kg/h

    mm

    l

    60

    1.4

    1

    7

    0.5

    0.19

    1,950 x 750 x 644

    200

    120

    2.8

    2

    14

    0.8

    0.38

    1,950 x 750 x 644

    200

    180

    4.2

    3

    21

    1.1

    0.57

    1,950 x 750 x 644

    200

    240

    5.6

    4

    28

    1.4

    0.75

    1,950 x 750 x 644

    200

    300

    7

    5

    35

    1.7

    0.95

    1,950 x 750 x 644

    200

    625

    15

    1

    75

    3.4

    1.9

    1,850 x 1,500 x 620

    200

    1250

    30

    2

    150

    6.8

    3.8

    1,850 x 1,500 x 620

    380

    2500

    60

    1

    300

    12.8

    7.5

    1,850 x 1,500 x 620

    520

    All figures apply for 20 °C ambient temperature and 15 °C feed water. The performance of the system is affected by the temperature and quality of the water and salt.

    Salt usage:3.0 kg/kg chlorine
    Energy efficiency:4.0 kWh/kg chlorine
    Product concentration:9 g/l (0.9 % ±0.05) chlorine
    pH value of product (approx.):9.5
    Salt specifications:CHLORINSITU salt, salt tablets or salt with a grain size of ≥ 6 mm, min. 99.4 % NaCl, max. 0.05 % insoluble substances, max. 10 mg/kg iron, max. 10 mg/kg manganese, max. 100 mg/kg calcium + magnesium
    Inlet water temperature:10...25 °C (lower/higher temperatures require a heater/chiller)
    Water supply:2 bar < pressure < 6 bar (drinking water quality)
    Ambient conditions:Non-condensing, non-corrosive and dust-free ambient air in the installation room
    Permissible relative air humidity:Max. 85 %
    Permissible ambient temperature:10...40 °C

    Downloads for Electrolysis System CHLORINSITU IIa 60 – 2,500 g/h

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)
    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    Enhanced efficiency through innovative design.

    The CHLORINSITU IIa product range combines the proven and robust construction of the undivided electrolytic cell with innovative design. An excellent quality of the hypochlorite solution is achieved while increasing the salt and electricity yield. The chlorate content of the product is below the limit value specified in EN 901.

    With a capacity of up to 2,500 g chlorine per hour, the electrolysis Chlorine and sodium hydroxide are produced in-situ in electrolysis by passing an electric ... more in the glossary system is perfectly equipped for safe water disinfection.

    All relevant system components are located in a space-saving housing. The integrated hydrogen removal system allows installation without additional ventilation requirements.

    For systems up to 300 g/h, the softener and a 50 l product container are installed in the system housing. An integrated metering pump transports the chlorine from the tank directly to the application or to a larger storage tank.

    An H2 degasser triggers the hydrogen directly from the hypochlorite in systems from 625 g/h. The hydrogen-free product is transported to an external product tank via an integrated pump. The product pump also conveys the product over height differences of up to 7 m. Customer-specific metering stations supply the points of injection.

    The external product tank does not require any additional hydrogen deaeration. This means there are no additional costs for installation and operation.

    Thanks to the plug & play concept, the system is ready for immediate use. The operation of the electrolysis Chlorine and sodium hydroxide are produced in-situ in electrolysis by passing an electric ... more in the glossary system is deliberately kept simple.

    Your benefits

    • Durable design, reliable technology
    • Low-chlorate product (below the EN 901 limit value)
    • High output: only 3.0 kg of salt per kg of chlorine
    • Reduced energy consumption: only 4 kWh/kg chlorine
    • Minimal maintenance work and ease of operation
    • System monitoring in real time from any location via DULCONNEX Platform: improved process reliability, overall reliability and transparency through real-time monitoring, individual alarms and automated reports (optional with the Siemens control variant)

    Video

    Application

    Technical Data

    Downloads

    Contact us

    Mr. Vikalp Tripathi

    Managing Director, Heidelberg ProMinent Fluid Controls India Pvt. Ltd.

    +91 8023 5788 72   
    Send request    

    »Please send us your request! We will contact you shortly.«

    +91 8023 5788 72  Send request   

    Practical examples for this product

    ProMinent Newsletter - receive latest news, customized for you! subscribe now

    +91 8023 5788 72
    Request
    Newsletter
    Call
    Request
    Newsletter