Plunger Metering Pump Makro TZ
Capacity range of single head pump: 8 – 1,141 l/h, 320 – 11 bar
The plunger metering pump Makro TZ impresses with its excellent process reliability, outstanding flexibility and its modular construction enables it to be outstandingly adapted to the performance requirements of the respective application.
Product description
Powerful, built to last with a plunger
The plunger metering pump Makro TZ (TZKa) has an adjustable eccentric drive mechanism and, together with the Makro TZ diaphragm metering pump, forms a range of drive mechanisms with stroke lengths of 10 and/or 20 mm. A wide range of drive versions is available, including some for use in Exe and Exde areas with ATEX certification.
Your benefits
Process reliability:
- Metering reproducibility is better than ± 0.5 % within the 10 – 100% stroke length range under defined conditions and with correct installation
Excellent flexibility:
- The modular construction with single and double-head versions permits a wide range of applications, with the double-head designs being operated in push-pull mode
- It is possible to combine up to 4 metering units, even with different pump capacities, in multiple pump systems
- 4 different gear ratios are available
- Customised designs are available on request
Field of application
The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.
- Volume-proportional metering of chemicals/additives in water treatment
- Metering of reactants and catalysts in the chemical industry
- Level-dependent metering of additives in industrial production engineering
Technical Details
- Stroke length: 0-20 mm
- Rod force: 8000 N
- Stroke length adjustment range: 0 – 100%
- Stroke length adjustment: manually using shift ring in 0.5% increments (optionally with electric actuator or control drive)
- Metering reproducibility is better than ± 0.5% within the 10 – 100% stroke length range under defined conditions and with proper installation. Observe the information in the operating instructions.
- High-performance ceramic-coated stainless steel plunger Wetted materials: Stainless steel 1.4571. Special materials are available on request
- A wide range of drive versions is available: Three-phase standard AC motors, motors for use in areas at risk from explosion and different flange designs for use in customer-specific motors
- Degree of protection: IP 55
- Salt water-resistant, acrylic resin-coated cast aluminium housing
- Provide suitable overflow equipment in all plunger metering pumps during installation for safety reasons
Technical Data
Type | Capacity at max. back pressure with 1500 rpm motor at 50 Hz | Capacity at max. back pressure at 60 Hz | Suction lift | Connector Suction/Discharge Side | Shipping weight | Plunger Ø | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
Max. stroke rate | Max. stroke rate | ||||||||||
l/h | bar | ml/stroke | Strokes/min | psi | l/h / gph (US) | Strokes/min | m WC | G-DN | kg | mm | |
* The suction and discharge side Rp 1/4 and Rp 3/8 connectors have an internal thread connection and are configured as double ball valves. | |||||||||||
320009 * | 8.7 | 320 | 2.0 | 72 | 4,627 | 10/2.6 | 86 | 4.0 | Rp 1/4–8 | 50 | 12 |
320012 * | 11.6 | 320 | 2.0 | 96 | 4,627 | 14/3.7 | 115 | 4.0 | Rp 1/4–8 | 50 | 12 |
320014 * | 14.5 | 320 | 2.0 | 120 | 4,627 | 17/4.5 | 144 | 4.0 | Rp 1/4–8 | 50 | 12 |
320017 * | 17.4 | 320 | 2.0 | 144 | 4,627 | 21/5.5 | 173 | 4.0 | Rp 1/4–8 | 50 | 12 |
320018 * | 17.7 | 320 | 4.1 | 72 | 4,627 | 21/5.5 | 86 | 4.0 | Rp 1/4–8 | 50 | 17 |
320024 * | 23.6 | 320 | 4.1 | 96 | 4,627 | 28/7.4 | 115 | 4.0 | Rp 1/4–8 | 54 | 17 |
320030 * | 29.5 | 320 | 4.1 | 120 | 4,627 | 35/9.2 | 144 | 4.0 | Rp 1/4–8 | 54 | 17 |
313035 * | 35.4 | 313 | 4.1 | 144 | 4,526 | 42/11.1 | 173 | 4.0 | Rp 1/4–8 | 54 | 17 |
192033 * | 32.9 | 192 | 7.6 | 72 | 2,776 | 39/10.3 | 86 | 4.0 | Rp 3/8–10 | 55 | 23 |
192044 * | 43.9 | 192 | 7.6 | 96 | 2,776 | 59/15.6 | 115 | 4.0 | Rp 3/8–10 | 55 | 23 |
192055 * | 54.8 | 192 | 7.6 | 120 | 2,776 | 66/17.4 | 144 | 4.0 | Rp 3/8–10 | 55 | 23 |
168066 * | 65.8 | 168 | 7.6 | 144 | 2,437 | 79/20.9 | 173 | 4.0 | Rp 3/8–10 | 55 | 23 |
113057 * | 57.5 | 113 | 13.3 | 72 | 1,634 | 69/18.2 | 86 | 4.0 | Rp 3/8–10 | 56 | 30 |
113077 * | 76.6 | 113 | 13.3 | 96 | 1,634 | 92/24.3 | 115 | 4.0 | Rp 3/8–10 | 56 | 30 |
113096 * | 95.8 | 113 | 13.3 | 120 | 1,634 | 115/30.4 | 144 | 4.0 | Rp 3/8–10 | 56 | 30 |
096115 * | 114.9 | 96 | 13.3 | 144 | 1,392 | 138/36.5 | 173 | 4.0 | Rp 3/8–10 | 56 | 30 |
063104 | 104.3 | 63 | 24.2 | 72 | 911 | 125/33.0 | 86 | 4.0 | G 1 1/4–20 | 58 | 40 |
063139 | 139.0 | 63 | 24.2 | 96 | 911 | 167/44.1 | 115 | 4.0 | G 1 1/4–20 | 58 | 40 |
063174 | 173.8 | 63 | 24.2 | 120 | 914 | 209/55.2 | 144 | 4.0 | G 1 1/4–20 | 58 | 40 |
052208 | 208.5 | 52 | 24.2 | 144 | 754 | 250/66.0 | 173 | 4.0 | G 1 1/4–20 | 58 | 40 |
040163 | 162.9 | 40 | 37.7 | 72 | 578 | 195/51.5 | 86 | 4.0 | G 1 1/4–20 | 58 | 50 |
040217 | 217.2 | 40 | 37.7 | 96 | 578 | 261/68.9 | 115 | 4.0 | G 1 1/4–20 | 58 | 50 |
040271 | 271.5 | 40 | 37.7 | 120 | 580 | 326/86.1 | 144 | 4.0 | G 1 1/4–20 | 58 | 50 |
033326 | 325.8 | 33 | 37.7 | 144 | 479 | 391/103.3 | 173 | 4.0 | G 1 1/4–20 | 58 | 50 |
028237 | 237.0 | 28 | 54.9 | 72 | 405 | 284/75.0 | 86 | 4.0 | G 1 1/2–25 | 62 | 60 |
028316 | 315.9 | 28 | 54.9 | 96 | 405 | 379/100.1 | 115 | 4.0 | G 1 1/2–25 | 62 | 60 |
027395 | 394.9 | 27 | 54.9 | 120 | 392 | 474/125.2 | 144 | 4.0 | G 1 1/2–25 | 62 | 60 |
022474 | 473.9 | 22 | 54.9 | 144 | 319 | 569/150.3 | 173 | 4.0 | G 1 1/2–25 | 62 | 60 |
020322 | 322.5 | 20 | 74.7 | 72 | 289 | 387/102.2 | 86 | 4.0 | G 1 1/2–25 | 62 | 70 |
020430 | 430.0 | 20 | 74.7 | 96 | 289 | 516/136.3 | 115 | 4.0 | G 1 1/2–25 | 62 | 70 |
020538 | 537.6 | 20 | 74.7 | 120 | 290 | 645/170.4 | 144 | 4.0 | G 1 1/2–25 | 62 | 70 |
016645 | 645.1 | 16 | 74.7 | 144 | 232 | 774/204.5 | 173 | 4.0 | G 1 1/2–25 | 62 | 70 |
Other gear reduction ratios are available upon request.
The permissible priming pressure on the suction side is approximately 50% of the max. permitted back pressure.
Materials in Contact with the Medium
Identity code of material | Hydraulic Ø mm | Dosing head | Connection on suction/discharge side | Ball seat | Valve balls | Plungers |
---|---|---|---|---|---|---|
SST | …12 S to 50 S | Stainless steel 1.4571/1.4404 | Stainless steel 1.4571/1.4404 | Stainless steel/PTFE | Oxide ceramic | Stainless steel/ceramic |
SST | …60 S to 70 S | Stainless steel 1.4571/1.4404 | Stainless steel 1.4581 | PTFE | Stainless steel 1.4404 | Stainless steel/ceramic |
Motor Data
Identity code specification | Power supply | Remarks | |||
S | 3-phase, IP 55* | 230 V/400 V | 50 Hz | 1.5 kW | |
R | 3-phase, IP 55* | 230 V/400 V | 50/60 Hz | 2.2 kW | With PTC, speed control range 1:20, with external fan 1-phase 230 V; 50/60 Hz |
V0 | 3-phase, IP 55* | 400 V | 50 Hz | 3.0 kW | Variable speed stroke control motor with integrated frequency converter |
L1 | 3-phase,II 2G Ex eb IIC T3 Gb | 220 – 240 V/380 – 420 V | 50 Hz | 1.5 kW | |
L2 | 3-phase,II 2G Ex db IIC T4 Gb | 220 – 240 V/380 – 420 V | 50 Hz | 1.5 kW | With PTC, speed control range 1:5 |
P1 | 3-phase,II 2G Ex e IIC T3 | 250 – 280 V/440 – 480 V | 60 Hz | 2.0 kW | On request |
P2 | 3-phase,II 2G Ex de IIC T4 | 250 – 280 V/440 – 480 V | 60 Hz | 1.5 kW | With PTC, speed control range 1:5, available on request |
Motor data sheets can be requested for more information. Versions 265/460V - 60Hz, special motors or special motor flanges are available on request.
Information for use in areas at risk from explosion
Only use pumps with the appropriate labelling in line with the ATEX Directive 2014/34/EC in premises at risk from explosion. Ensure that the explosion group, category and degree of protection specified on the label correspond to or are superior to the conditions prevalent in the intended application.
Downloads for Plunger Metering Pump Makro TZ
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Overview
Powerful, built to last with a plunger
The plunger metering pump Makro TZ (TZKa) has an adjustable eccentric drive mechanism and, together with the Makro TZ diaphragm metering pump, forms a range of drive mechanisms with stroke lengths of 10 and/or 20 mm. A wide range of drive versions is available, including some for use in Exe and Exde areas with ATEX certification.
Your benefits
Process reliability:
- Metering reproducibility is better than ± 0.5 % within the 10 – 100% stroke length range under defined conditions and with correct installation
Excellent flexibility:
- The modular construction with single and double-head versions permits a wide range of applications, with the double-head designs being operated in push-pull mode
- It is possible to combine up to 4 metering units, even with different pump capacities, in multiple pump systems
- 4 different gear ratios are available
- Customised designs are available on request
Application
Field of application
The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.
- Volume-proportional metering of chemicals/additives in water treatment
- Metering of reactants and catalysts in the chemical industry
- Level-dependent metering of additives in industrial production engineering
Technical Data
Technical Details
- Stroke length: 0-20 mm
- Rod force: 8000 N
- Stroke length adjustment range: 0 – 100%
- Stroke length adjustment: manually using shift ring in 0.5% increments (optionally with electric actuator or control drive)
- Metering reproducibility is better than ± 0.5% within the 10 – 100% stroke length range under defined conditions and with proper installation. Observe the information in the operating instructions.
- High-performance ceramic-coated stainless steel plunger Wetted materials: Stainless steel 1.4571. Special materials are available on request
- A wide range of drive versions is available: Three-phase standard AC motors, motors for use in areas at risk from explosion and different flange designs for use in customer-specific motors
- Degree of protection: IP 55
- Salt water-resistant, acrylic resin-coated cast aluminium housing
- Provide suitable overflow equipment in all plunger metering pumps during installation for safety reasons
Technical Data
Type | Capacity at max. back pressure with 1500 rpm motor at 50 Hz | Capacity at max. back pressure at 60 Hz | Suction lift | Connector Suction/Discharge Side | Shipping weight | Plunger Ø | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
Max. stroke rate | Max. stroke rate | ||||||||||
l/h | bar | ml/stroke | Strokes/min | psi | l/h / gph (US) | Strokes/min | m WC | G-DN | kg | mm | |
* The suction and discharge side Rp 1/4 and Rp 3/8 connectors have an internal thread connection and are configured as double ball valves. | |||||||||||
320009 * | 8.7 | 320 | 2.0 | 72 | 4,627 | 10/2.6 | 86 | 4.0 | Rp 1/4–8 | 50 | 12 |
320012 * | 11.6 | 320 | 2.0 | 96 | 4,627 | 14/3.7 | 115 | 4.0 | Rp 1/4–8 | 50 | 12 |
320014 * | 14.5 | 320 | 2.0 | 120 | 4,627 | 17/4.5 | 144 | 4.0 | Rp 1/4–8 | 50 | 12 |
320017 * | 17.4 | 320 | 2.0 | 144 | 4,627 | 21/5.5 | 173 | 4.0 | Rp 1/4–8 | 50 | 12 |
320018 * | 17.7 | 320 | 4.1 | 72 | 4,627 | 21/5.5 | 86 | 4.0 | Rp 1/4–8 | 50 | 17 |
320024 * | 23.6 | 320 | 4.1 | 96 | 4,627 | 28/7.4 | 115 | 4.0 | Rp 1/4–8 | 54 | 17 |
320030 * | 29.5 | 320 | 4.1 | 120 | 4,627 | 35/9.2 | 144 | 4.0 | Rp 1/4–8 | 54 | 17 |
313035 * | 35.4 | 313 | 4.1 | 144 | 4,526 | 42/11.1 | 173 | 4.0 | Rp 1/4–8 | 54 | 17 |
192033 * | 32.9 | 192 | 7.6 | 72 | 2,776 | 39/10.3 | 86 | 4.0 | Rp 3/8–10 | 55 | 23 |
192044 * | 43.9 | 192 | 7.6 | 96 | 2,776 | 59/15.6 | 115 | 4.0 | Rp 3/8–10 | 55 | 23 |
192055 * | 54.8 | 192 | 7.6 | 120 | 2,776 | 66/17.4 | 144 | 4.0 | Rp 3/8–10 | 55 | 23 |
168066 * | 65.8 | 168 | 7.6 | 144 | 2,437 | 79/20.9 | 173 | 4.0 | Rp 3/8–10 | 55 | 23 |
113057 * | 57.5 | 113 | 13.3 | 72 | 1,634 | 69/18.2 | 86 | 4.0 | Rp 3/8–10 | 56 | 30 |
113077 * | 76.6 | 113 | 13.3 | 96 | 1,634 | 92/24.3 | 115 | 4.0 | Rp 3/8–10 | 56 | 30 |
113096 * | 95.8 | 113 | 13.3 | 120 | 1,634 | 115/30.4 | 144 | 4.0 | Rp 3/8–10 | 56 | 30 |
096115 * | 114.9 | 96 | 13.3 | 144 | 1,392 | 138/36.5 | 173 | 4.0 | Rp 3/8–10 | 56 | 30 |
063104 | 104.3 | 63 | 24.2 | 72 | 911 | 125/33.0 | 86 | 4.0 | G 1 1/4–20 | 58 | 40 |
063139 | 139.0 | 63 | 24.2 | 96 | 911 | 167/44.1 | 115 | 4.0 | G 1 1/4–20 | 58 | 40 |
063174 | 173.8 | 63 | 24.2 | 120 | 914 | 209/55.2 | 144 | 4.0 | G 1 1/4–20 | 58 | 40 |
052208 | 208.5 | 52 | 24.2 | 144 | 754 | 250/66.0 | 173 | 4.0 | G 1 1/4–20 | 58 | 40 |
040163 | 162.9 | 40 | 37.7 | 72 | 578 | 195/51.5 | 86 | 4.0 | G 1 1/4–20 | 58 | 50 |
040217 | 217.2 | 40 | 37.7 | 96 | 578 | 261/68.9 | 115 | 4.0 | G 1 1/4–20 | 58 | 50 |
040271 | 271.5 | 40 | 37.7 | 120 | 580 | 326/86.1 | 144 | 4.0 | G 1 1/4–20 | 58 | 50 |
033326 | 325.8 | 33 | 37.7 | 144 | 479 | 391/103.3 | 173 | 4.0 | G 1 1/4–20 | 58 | 50 |
028237 | 237.0 | 28 | 54.9 | 72 | 405 | 284/75.0 | 86 | 4.0 | G 1 1/2–25 | 62 | 60 |
028316 | 315.9 | 28 | 54.9 | 96 | 405 | 379/100.1 | 115 | 4.0 | G 1 1/2–25 | 62 | 60 |
027395 | 394.9 | 27 | 54.9 | 120 | 392 | 474/125.2 | 144 | 4.0 | G 1 1/2–25 | 62 | 60 |
022474 | 473.9 | 22 | 54.9 | 144 | 319 | 569/150.3 | 173 | 4.0 | G 1 1/2–25 | 62 | 60 |
020322 | 322.5 | 20 | 74.7 | 72 | 289 | 387/102.2 | 86 | 4.0 | G 1 1/2–25 | 62 | 70 |
020430 | 430.0 | 20 | 74.7 | 96 | 289 | 516/136.3 | 115 | 4.0 | G 1 1/2–25 | 62 | 70 |
020538 | 537.6 | 20 | 74.7 | 120 | 290 | 645/170.4 | 144 | 4.0 | G 1 1/2–25 | 62 | 70 |
016645 | 645.1 | 16 | 74.7 | 144 | 232 | 774/204.5 | 173 | 4.0 | G 1 1/2–25 | 62 | 70 |
Other gear reduction ratios are available upon request.
The permissible priming pressure on the suction side is approximately 50% of the max. permitted back pressure.
Materials in Contact with the Medium
Identity code of material | Hydraulic Ø mm | Dosing head | Connection on suction/discharge side | Ball seat | Valve balls | Plungers |
---|---|---|---|---|---|---|
SST | …12 S to 50 S | Stainless steel 1.4571/1.4404 | Stainless steel 1.4571/1.4404 | Stainless steel/PTFE | Oxide ceramic | Stainless steel/ceramic |
SST | …60 S to 70 S | Stainless steel 1.4571/1.4404 | Stainless steel 1.4581 | PTFE | Stainless steel 1.4404 | Stainless steel/ceramic |
Motor Data
Identity code specification | Power supply | Remarks | |||
S | 3-phase, IP 55* | 230 V/400 V | 50 Hz | 1.5 kW | |
R | 3-phase, IP 55* | 230 V/400 V | 50/60 Hz | 2.2 kW | With PTC, speed control range 1:20, with external fan 1-phase 230 V; 50/60 Hz |
V0 | 3-phase, IP 55* | 400 V | 50 Hz | 3.0 kW | Variable speed stroke control motor with integrated frequency converter |
L1 | 3-phase,II 2G Ex eb IIC T3 Gb | 220 – 240 V/380 – 420 V | 50 Hz | 1.5 kW | |
L2 | 3-phase,II 2G Ex db IIC T4 Gb | 220 – 240 V/380 – 420 V | 50 Hz | 1.5 kW | With PTC, speed control range 1:5 |
P1 | 3-phase,II 2G Ex e IIC T3 | 250 – 280 V/440 – 480 V | 60 Hz | 2.0 kW | On request |
P2 | 3-phase,II 2G Ex de IIC T4 | 250 – 280 V/440 – 480 V | 60 Hz | 1.5 kW | With PTC, speed control range 1:5, available on request |
Motor data sheets can be requested for more information. Versions 265/460V - 60Hz, special motors or special motor flanges are available on request.
Information for use in areas at risk from explosion
Only use pumps with the appropriate labelling in line with the ATEX Directive 2014/34/EC in premises at risk from explosion. Ensure that the explosion group, category and degree of protection specified on the label correspond to or are superior to the conditions prevalent in the intended application.
Downloads
Downloads for Plunger Metering Pump Makro TZ
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Contact us
Mr. Vikalp Tripathi
Managing Director, Heidelberg ProMinent Fluid Controls India Pvt. Ltd.