Suggestions
Products
See all results for products

Plunger Metering Pump ORLITA PS

Capacity range of single-head pump: 0 – 2800 l/h, 800 – 11 bar

The high-performance plunger metering pump ORLITA PS enables precise pump capacities even at maximum pressure and temperatures of up to +400 °C. The ORLITA PS pump has a modular construction and is therefore very flexible.

Product description

ORLITA PS - simple, robust and reliable.

ORLITA PS plunger metering pumps (PS 35 to PS 600) with a stroke length of 20 to 40 mm provide a capacity ranging from 0 to 2800 l/h at 600 – 11 bar. A wide range of drive versions is available, including some for use in Exe and Exde areas with ATEX certification. The ORLITA PS product range is designed to comply with API 675. Its modular construction permits the free combination of drive units, drives and dosing heads, producing a pump for a range of different feed rates and media operating at different working pressures.

Your benefits

Flexible adaptation to the process:

  • Precise capacity even at maximum pressure
  • The dosing precision is better than ± 1 % within the 10-100 % stroke length range under defined conditions and with correct installation.
  • Cone valves for use as suction and/or discharge valves with minimal wear, good self-cleaning and low pressure loss (NPSHR)
  • Excellent hydraulic efficiency

Excellent flexibility:

  • The modular construction ensures a wide range of uses
  • It is possible to combine up to 6 metering units, even with different pump capacities, in multiple pump systems

Field of application

The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.

  • Oil/ gas production (onshore/offshore)
  • Refineries
  • Chemical/Petrochemical industry
  • Pharmaceuticals & cosmetics
  • Packaging industry (bottling pumps)
  • Maximum temperature applications of up to +400 °C

    Metering of Fluids in Chemical Production

    Incredible versatility: metering pumps in production

    There are various types of metering pumps, but what they all have in common is reliability, robustness and thoroughness. That's why all our pumps are in demand in chemical production.
    more

    Inhibitor Metering Offshore

    For smooth oil production

    Our ProMinent metering pumps keep the pipework clear 24 hours a day and protect against corrosion and defects. So the oil can keep flowing.
    more

    Onshore Metering in Gas Pump Stations

    Safety at the borehole

    Flammable methane hydrate at the borehole can be very dangerous. But not with ProMinent metering pumps. By metering fluid into the drilling head, they don't even allow methane hydrate to be produced in the first place.
    more

    Downstream Oil Treatment

    It's all about the oil

    Makro diaphragm metering pumps or even the new Evolution pumps are used for emulsion cracking so that the precious oil is perfectly separated from other substances. The pumps are completely autonomous.
    more

    Metering of Fluids

    Incredibly simple and efficient metering of chemicals

    We transport chemicals with ease in any industrial environment: ProMinent solutions store, transfer and meter substances at rates of 0.1 l/h to 100,000 l/h at a pressure of 2 to 3,000 bar.
    more

    Technical Details

    • PS 35 – stroke length: 0-20 mm, rod force: 3500 N
    • PS 80 – stroke length: 0-20 mm, rod force: 14000 N
    • PS 180 – stroke length: 0-40 mm, rod force: 18000 N
    • PS 600 – stroke length: 0-40 mm, rod force: 40000 N
    • Stroke length adjustment range: 0 – 100% in operation and idle
    • The plunger packing can be tightened by the tensioning screw on the front even during operation
    • The dosing precision is better than ± 1 % within the 10 – 100 % stroke length range under defined conditions and with correct installation
    • Wetted materials: Stainless steel, special designs are available on request
    • A wide range of power end/drive versions is available: Three-phase standard AC motors, motors for use in Exe and Exde areas and different flange designs for use in customer-specific motors
    • Degree of protection: IP 55
    • Temperature range - 40 °C to + 400 °C
    • Design in compliance with API 675 among others

    Technical data for ORLITA PS 35 single-head pump 50 Hz

    Technical data for ORLITA PS 80 single-head pump 50 Hz

    Technical data for ORLITA PS 180 single-head pump 50 Hz

    Technical data for ORLITA PS 600 single-head pump 50 Hz

    All performance data applies to 50 Hz. If a 60 Hz motor is used, the performance will be correspondingly higher.

    Abridged presentation of our complete product range. Other types on request.

    Downloads for Plunger Metering Pump ORLITA PS

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)
    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    ORLITA PS - simple, robust and reliable.

    ORLITA PS plunger metering pumps (PS 35 to PS 600) with a stroke length of 20 to 40 mm provide a capacity ranging from 0 to 2800 l/h at 600 – 11 bar. A wide range of drive versions is available, including some for use in Exe and Exde areas with ATEX certification. The ORLITA PS product range is designed to comply with API 675. Its modular construction permits the free combination of drive units, drives and dosing heads, producing a pump for a range of different feed rates and media operating at different working pressures.

    Your benefits

    Flexible adaptation to the process:

    • Precise capacity even at maximum pressure
    • The dosing precision is better than ± 1 % within the 10-100 % stroke length range under defined conditions and with correct installation.
    • Cone valves for use as suction and/or discharge valves with minimal wear, good self-cleaning and low pressure loss (NPSHR)
    • Excellent hydraulic efficiency

    Excellent flexibility:

    • The modular construction ensures a wide range of uses
    • It is possible to combine up to 6 metering units, even with different pump capacities, in multiple pump systems

    Application

    Technical Data

    Downloads

    Contact us

    Mr. Vikalp Tripathi

    Managing Director, Heidelberg ProMinent Fluid Controls India Pvt. Ltd.

    +91 8023 5788 72   
    Send request    

    »Please send us your request! We will contact you shortly.«

    +91 8023 5788 72  Send request   

    ProMinent Newsletter - receive latest news, customized for you! subscribe now

    +91 8023 5788 72
    Request
    Newsletter
    Call
    Request
    Newsletter